-
Body Parts
- Radiator Grills
- Beams
- Sheets
- Mudguards
- Assembly Parts
- Roofs
- Door
- Cabins
- Fuel Filler Flaps
- Trunk Lid
- Moldings
- Exterior Mirrors
- Masks
- Wheel Arches
- Mud Guards
- Front Belts
- Rear Belts
- Floors
- Cowl
- Thresholds
- Framework
- Bars
- Spoilers
- Degrees
- Glass
- Walls Panels
- Brackets Fasteners
- Buildings
- Bumpers
- Sheet Metal Kits
- The Remaining
- Filters
- Lighting
-
Engines And Accessories
- Engine Block
- Manifold Pressure (MAP) Sensors
- Knock Sensors
- Accessory Belt Drive Components
- Cylinder Heads
- Suction Collectors
- Gas Links
- Air Filter Housings
- Engine Covers
- Vacuum Pumps
- Flow Meters
- Dampers
- Air Hoses
- EGR Exhaust Gas Recirculation
- Distribution
- Complete Engines
- Stepper Motors
- Engine Lubrication
- Turbochargers
- Engine Suspension
- Vacuum Valves
- The Remaining
- Engine Cooling System
-
Electrical System Ignition
- Braking System
- Steering System
- Air Conditioning System
- Drive System
-
Fuel System
- AdBlue
- Fuel Coolers
- Assembly Parts
- Fuel Level Sensors
- Fuel Temperature Sensors
- Carburettors
- Injector Tips
- Filler Plugs
- Injection Rails
- LPG
- Mono-injectors
- Fuel Filter Housings
- Heaters
- Unit Injectors
- Fuel Pumps
- Injection Pumps
- Fuel Lines
- Injection Lines
- Fuel Pressure Regulators
- Distributors
- Drivers
- Seals
- Fuel Fillers
- Injectors
- Valves
- Tanks
- Repair Kits
- The Remaining
- Pneumatic System
- Ventilation System
- Exhaust System
-
Suspension System
- Shock Absorbers And Components
- Suspension Beams
- Driver's Cab Suspension
- Assembly Parts
- Wheel Bearings And Hubs
- Suspension Spring Washers
- Springs And Elements
- Suspension Springs
- Stabilizers And Elements
- Swingarms And Components
- Hydraulic And Air Suspension
- Suspension Kits (shock Absorbers And Springs)
- Crossovers
- The Remaining
- Wipers And Washers
-
Interior Fittings
- Trunk Sides
- Door Sides
- Parts Of The Driver's Cabin
- Dashboards Consoles
- Fastening Elements
- Armchairs Sofas
- Knobs And Bellows
- Handlebars
- Internal Handles
- Window Cranks
- Air Supply Grilles
- Counters Clocks
- Interior Mirrors
- Spare Wheel Holder
- Factory GPS Navigation
- Covers Plugs
- Sun Visors
- Cabin Lighting
- Control Panels Switches
- Seatbelts
- Pedals
- Armrests
- Soffits
- Airbags
- Ashtrays
- Plating Of The Posts
- Rear Shelves
- Trunk Blinds
- Lockers Shelves
- Gas Springs
- Factory Audio Equipment
- Middle Tunnels
- Factory Handles
- Covering
- Headrests
- Car Lighters
- The Remaining
- Parking Heating And Car Cooling
- Mechanical Tuning
-
The Remaining
Categories
- Body Parts
- Filters
- Lighting
- Engines And Accessories
- Engine Cooling System
- Electrical System Ignition
- Braking System
- Steering System
- Air Conditioning System
- Drive System
- Fuel System
- Pneumatic System
- Ventilation System
- Exhaust System
- Suspension System
- Wipers And Washers
- Interior Fittings
- Parking Heating And Car Cooling
- Mechanical Tuning
- The Remaining
VW Golf 2 Corrado G60 Brake calipers. front 288x25
See alternative products below, or contact-us to suggest an alternative. We have over 3 million products in our catalog
| Condition | Used |
|---|---|
| Part manufacturer | ATE |
| Car type | Passenger cars |
| Piston diameter | 57 mm |
| Fitting side | front |
-
Express ShippingPromptly Delivered Auto Parts
-
Exceptional SupportExpert Assistance for Your Auto Part Needs
-
Secure TransactionsConfidence in Our Fully Protected Transactions
-
Hot OffersDiscounts up to 70%
We offer an alternative set of brake calipers "ATE 57", visible in the photos, with clamps on the front axle for car models mentioned in the title of the auction for 288x25 discs. The kit also fits VW Golf II Syncro G60, Golf III, Vento, Caddy, Jetta, Passat B3, Passat B4, Seat Ibiza, Toledo etc. with factory 4x100 disc / rim spacing.
The discs for this set must be 288x25 (5x100) VW Golf IV GTI. New holes with a 4x100 spacing have to be moulded (drilled) in them. We can deliver properly modified discs for the price from 350/2 pcs. (price depends on the brand of discs).
The 57mm pistons have a cross-sectional area of approx. 9% larger than the standard 54mm pistons. In addition, the diameter of the 288mm discs is approx. 1% larger than 280mm. This translates into a simple conversion into a reduction of the braking distance by approx. 10% compared to the standard calipers and discs with G60.
We offer ready-made different Brembo brake kits for many models of cars from the VAG group and for other brands, and we can prepare sets that we do not have "on the spot" in a short time. Also for the rear axle.
The clamps are perfectly renovated, sandblasted and powder coated in orange (RAL 2004).
Within a few working days, at the same price, we can prepare the same set in any other color. You can choose any color from the RAL palette. Powder varnish, of course.
We have extensive experience in the preparation of brake kits for cars competing in events of the Polish championship rank (rallies, mountain races, rallycross, 1/4 miles). We also undertake the renovation of any brake calipers and the adaptation of Brembo, Alcon, K-sport, D2, etc. calipers to each car ... In addition, we have experience in building twisted-two-piece or twisted-floating discs from scratch, including ceramic discs, of any dimensions and for every car.
Regards. pavel. tel. 600 *** 710 *** 829 ***
Ich spreche und schreibe fliessend deutsch
Related Products
